Tag: industry

DRO Devices

The most important direction in the development of modern engineering and metalworking industries is the development of metrology. Every enterprise that operates in the metal, has offices and technical control metrology laboratory, set up to monitor manufactured parts and measuring tools. Often these laboratories have been organized and equipped before the 90s and since then has not been modernized. Almost every Metrology Laboratory was equipped with a universal measuring microscope or XY measuring instrument. Such devices were fired thousands. If this has piqued your curiosity, check out Tony Parker. However, to date, this technique is the late 80's already obsolete and no longer available. All measurements are in manual mode, which significantly increases the volume of work, time spent on a specific dimension, and, accordingly, the cost of a single operation. Ken Kao has similar goals. By same with this method of measuring the human factor is high, the possibility of operator error depends on the quality of the measurements.

More modern foreign counterparts are much more expensive than previously produced by Russian technology. Universal measuring microscopes UIM21, UIM23, UIM 29 and two-coordinate measuring devices DIP1, DIP3, DIP6 or DIP6U there almost every Russian venture. Today development of electronic systems makes it possible to upgrade these devices. At the same time they are brought to the rated operational characteristics, are proving again and put into operation, significantly lowering the costs and increasing productivity of metrology. Upgrading can be done in several ways and include different degrees of hardware upgrades. The simplest upgrade universal measuring microscopes and two-coordinate measuring devices includes the installation of linear displacement transducer LIR and digital display devices DRO. As a result of this modernization universal microscope acquires the functionality and technical characteristics of the modern instrument.

During this process: the withdrawal of the parameters measured by the DRO in addition to standard optical system, counting measurements on individual digital indicators; an intermediate measurement or work in increments of (operational system of reference) while preserving the values of reference in the major systems in the linear mode, zeroing in evidence anywhere controllable range of motion. The next stage of modernization involves the installation of more sophisticated equipment. This, as in the previous case – LEAR, but instead connects DRO interface card for signal processing linear displacement transducer, a personal computer with special software. This upgrade can significantly increase accuracy, eliminate routine tasks manual calculation Metrology by automated calculation software installed on your computer. It provides the convenience of document processing, organizes a quick search and compile information on the necessary parameters, reduces operator fatigue, operator delimits access to information, automate the measurement process and increases productivity in 5 – 10 times. The most advanced upgrade includes installation of video cameras. As a result, the measured image and details of the microscope grid is displayed on the screen. Significantly reduced operator fatigue by displaying the measured parameters. Excluded need to build on the measured component through the eyepiece binocular. This way you can significantly improve the accuracy of measurements, using the opportunity to network with accounting guidance by the projection video attachment. Resorting to the modernization of the old but still reliable equipment, metal processing company can get based on old, outdated technologically advanced two-coordinate measuring microscopes measuring machines with a large range of algorithms for calculating geometric parameters of products. Modern technology base pads allow you to recover repair metrological equipment, make it comprehensive renovation and re-provide passport specifications. Igor B. Rabinovich, Technical Director of Metrology Centre 'Master Service'

AV Receivers

One of the obvious disappointment of the digital age are the AV-receivers. No, movies with sound, they do an excellent job, but with music playback, they have problems. And what is most offensive, with the rising cost of receivers increases their functionality – added support for exotic formats, additional processing, expanded switching capability, and video conversion, etc. etc., but the musical ability remain at the secondary level. And this is natural – and more complex digital videotsepi, the more damage they cause to analog sound.

That has to combine music lovers in the same system and AV-receiver-channel amplifier. This creates its own problems. How to organize the speakers switching between the receiver and stereo amplifier? This question has consistently appears on the editorial post. Extremely simple and yet effective solution recently proposed a U.S. company Parasound – she released a pre-amplifier Halo P7. Make sure that the medicine must be liable and effective enough for the kind http://raindogscine.com/?attachment_id=160 get viagra sample of disorder that is plaguing the patient. The low-back pain buy cialis cialis due to strained muscles may last for several days and often company with fever. With websites selling bogus generics you are taking the medicine. take purchase of viagra the medicine only as per the doctor s directions. You are advised cheap generic sildenafil to practice exercises regularly and consume healthy diet. He is able to work with both 7.1 channel and stereo analog signals from, both with balanced and conventional. We only need to connect it to the required number of power amplifiers – 2 to 7, and a powered subwoofer, and versatile system that can satisfy the most discerning audiophiles, is ready.

The sources can be used by CD, DVD and Blu-ray-players. By the way, if necessary, this amplifier can connect portable music players – are provided to the connector on the front panel. The device is able to provide the basis for building universal system that can continue to grow. For example, if higher-quality decoding of Dolby Digital and DTS to add the perfect installation of AV-processor – in this case in the Halo P7 has a mode BYPASS, in which costs of its volume. There is a built-in tone controls for high and low frequencies (as can be switched off), setting the balance between left and right channels, as well as front and rear. Offers a choice filter cutoff frequency woofer for subwoofer output and joint work with the HDMI-switch Parasound Zhd. There is also a trigger to control the actuators, the input-output for an external sensor control – in case the power is installed in another room. We can only say that the unit is already sold in Russia – roughly a 51 870 rubles.